Resonant Frequency Calculator

Use



   Use the boxes on the right-hand side to select value to calculate.

(Hint: While it is probably a good practise to always make these your first steps when using this form, it can be done at any time - if you forget to select before entering values into the fields you won't have to clear the form and start all over. Electrist will recalculate using the existing values anytime you change the Display setting.)

   The three values:

• f: Frequency
• L: Inductance
• C: Capacitance

   When the values are entered into both of the unselected fields tap the Calc button to display the calculated value.

(Hint: Remember that you can use the scale-lock buttons to force the inductance value to display as microHenries and/or the capacitance value to display as microFarads.)